DIN slip-on flanges, PN 10
Every size in the table, in mm, with a 3D model drawn from the same figures. See slip-on flanges for materials, standards and the marking.
3D model
DN 350 PN 10 slip-on
Key dimensions in mm, DIN 8029
- D
- Flange diameter
- 505
- b1
- Flange thickness
- 26
- d6
- Hub diameter
- 398
- d5
- Bore, series 1
- 372.2
- d5
- Bore, series 2
- 359.7
- r2
- Radius
- 10
- h2
- Length through hub
- 53
- d4
- Raised face diameter
- 430
- f
- Raised face height
- 4
- k
- Bolt circle (PCD)
- 460
- d2
- Bolt hole diameter
- 22
- Thrd
- Bolt thread
- M 20
- n
- Number of holes
- 16
- kg
- Weight, approx.
- 22.4
Dimensions
Swipe the table sideways for every column. Choose a size to show it in the viewer.
| DNSize | DFlange diameter | b1Flange thickness | d6Hub diameter | d5Bore (1) | d5Bore (2) | r2Radius | h2Length through hub | d4Raised face diameter | fRaised face height | kBolt circle (PCD) | d2Bolt hole diameter | ThrdBolt thread | nNumber of holes | kgWeight, approx. | Enquiry list |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 340 | 24 | 247 | 221.8 | not listed | 6 | 44 | 268 | 3 | 295 | 22 | M 20 | 8 | 10 | ||
| 395 | 26 | 300 | 276.2 | 270.2 | 6 | 46 | 320 | 3 | 350 | 22 | M 20 | 12 | 12.7 | ||
| 445 | 26 | 352 | 327.6 | not listed | 6 | 46 | 370 | 4 | 400 | 22 | M 20 | 12 | 14.4 | ||
| 505 | 26 | 398 | 372.2 | 359.7 | 10 | 53 | 430 | 4 | 460 | 22 | M 20 | 16 | 22.4 | In the viewer | |
| 565 | 26 | 448 | 423.7 | 411 | 10 | 57 | 482 | 4 | 515 | 26 | M 24 | 16 | 26.9 | ||
| 670 | 28 | 552 | 513.6 | not listed | 10 | 67 | 585 | 4 | 620 | 26 | M 24 | 20 | 37.8 |
Dimensions in mm, for reference. Tolerances and full requirements as per the applicable standard. Confirm against your specification before ordering.
Source: Shiv Shakti Machine Tools Flange Catalogue, edition 2026 (draft), page 14. “–” means the catalogue lists no value.
[CONFIRM: table checked and signed off by the owners (unverified)][CONFIRM: whether the flange thickness includes the raised face]