DIN plate flanges, PN 40
Every size in the table, in mm, with a 3D model drawn from the same figures. See plate flanges for materials, standards and the marking.
3D model
DN 150 PN 40 plate
Key dimensions in mm, DIN 2503
- D
- Flange diameter
- 300
- b2
- Flange thickness
- 28
- d5
- Bore, series 1
- –
- d5
- Bore, series 2
- 170.5
- e
- Chamfer (x 45°)
- –
- k
- Bolt circle (PCD)
- 250
- d2
- Bolt hole diameter
- 26
- Thrd
- Bolt thread
- M 24
- n
- Number of holes
- 8
- kg
- Weight, approx.
- 9.6
Dimensions
Swipe the table sideways for every column. Choose a size to show it in the viewer.
| DNSize | DFlange diameter | b2Flange thickness | d5Bore (1) | d5Bore (2) | eChamfer (x 45°) | kBolt circle (PCD) | d2Bolt hole diameter | ThrdBolt thread | nNumber of holes | kgWeight, approx. | Enquiry list |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 90 | 16 | not listed | 17.7 | not listed | 60 | 14 | M 12 | 4 | 0.7 | ||
| 95 | 16 | not listed | 22 | not listed | 65 | 14 | M 12 | 4 | 0.8 | ||
| 105 | 18 | not listed | 27.6 | not listed | 75 | 14 | M 12 | 4 | 1.1 | ||
| 115 | 18 | not listed | 34.4 | not listed | 85 | 14 | M 12 | 4 | 1.3 | ||
| 140 | 18 | not listed | 43.1 | not listed | 100 | 18 | M 16 | 4 | 1.8 | ||
| 150 | 18 | not listed | 49 | not listed | 110 | 18 | M 16 | 4 | 2.1 | ||
| 165 | 20 | not listed | 61.1 | not listed | 125 | 18 | M 16 | 4 | 2.7 | ||
| 185 | 22 | not listed | 77.1 | not listed | 145 | 18 | M 16 | 8 | 3.5 | ||
| 200 | 24 | not listed | 90.3 | not listed | 160 | 18 | M 16 | 8 | 4.3 | ||
| 235 | 24 | not listed | 115.9 | not listed | 190 | 22 | M 20 | 8 | 5.6 | ||
| 270 | 26 | not listed | 141.6 | not listed | 220 | 26 | M 24 | 8 | 7.6 | ||
| 300 | 28 | not listed | 170.5 | not listed | 250 | 26 | M 24 | 8 | 9.6 | In the viewer | |
| 375 | 34 | not listed | 221.8 | not listed | 320 | 30 | M 27 | 12 | 16.9 | ||
| 450 | 38 | not listed | 276.2 | not listed | 385 | 33 | M 30 | 12 | 26.5 | ||
| 515 | 42 | not listed | 327.6 | not listed | 450 | 33 | M 30 | 16 | 36.8 | ||
| 580 | 46 | not listed | 359.7 | not listed | 510 | 36 | M 33 | 16 | 52.2 | ||
| 660 | 50 | not listed | 411 | not listed | 585 | 39 | M 36 | 16 | 74.7 | ||
| 755 | 52 | not listed | 513.6 | not listed | 670 | 42 | M 39 | 20 | 86.9 |
Dimensions in mm, for reference. Tolerances and full requirements as per the applicable standard. Confirm against your specification before ordering.
Source: Shiv Shakti Machine Tools Flange Catalogue, edition 2026 (draft), page 13. “–” means the catalogue lists no value.
[CONFIRM: table checked and signed off by the owners (unverified)]