Plate flanges
A flat plate flange welded to the pipe. Simple and economical for low-pressure water and utility lines. [CONFIRM: this type is made]
3D model
Drag to rotate. Scroll or pinch to zoom. Double-click to reset. With the keyboard, focus the view, then use the arrow keys to rotate and + or − to zoom.
Key to the letters
- D
- Flange diameter
- b2
- Flange thickness
- d5
- Bore, series 1
- d5
- Bore, series 2
- e
- Chamfer (x 45°)
- k
- Bolt circle (PCD)
- d2
- Bolt hole diameter
- Thrd
- Bolt thread
- n
- Number of holes
Values in mm, from the table below.
Specification
- Type
- Plate (PL)
- Model shown
- DN 150 PN 16, FF, DIN 2502
- Units
- mm, inches for ASME sizes
- Sizes
- ½" to 24" NB (DN 15 to DN 600). Dimension tables: DN 10 to DN 500 to DIN. [CONFIRM: sizes]
- Ratings
- ASME Class 150, 300, 600, 900, 1500 and 2500. PN 6 to PN 100. JIS 5K to 20K. [CONFIRM: ratings]
- Facings
- Raised face (RF), flat face (FF), ring type joint (RTJ), tongue and groove (T&G), and male and female (M&F). Standard serrated finish, 3.2 to 6.3 µm Ra (125 to 250 µin). Smooth finish on request. [CONFIRM: facings]
- Standards
- ASME B16.5 (NPS ½" to 24"), EN 1092-1 (DN 15 to DN 600), DIN, BS 4504, BS 10 (Tables D, E, F and H), JIS B2220, IS 6392. [CONFIRM: standards for plate]
- Materials
- Carbon steel plate E250. EN and DIN grades P245GH and P250GH (C22.8). [CONFIRM: grades]
- Finishes
- Rust-preventive oil and black anti-rust paint. [CONFIRM: finishes]
- Documents and inspection
- EN 10204 3.1 material test certificate. Dimensional inspection report. Third-party inspection on request, for example BV, SGS, TÜV, Lloyd’s Register, DNV.
The marking, explained
Every flange is stamped on its rim, so it can be traced to its heat and its material certificate. Choose any part of the stamp to see what it means.
PN16Pressure
Nominal pressure PN 16. The pressure it can hold at a given temperature depends on the material.
HT 24A117 is a sample heat number. The stamp follows MSS SP-25.
[CONFIRM: exact stamp format and the mark we stamp]
Dimensions
Plate, DIN 2502, PN 16. Choose a size to see it in the viewer.
Swipe the table sideways for every column. Choose a size to show it in the viewer.
| DNSize | DFlange diameter | b2Flange thickness | d5Bore (1) | d5Bore (2) | eChamfer (x 45°) | kBolt circle (PCD) | d2Bolt hole diameter | ThrdBolt thread | nNumber of holes | kgWeight, approx. | Enquiry list |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 90 | 14 | not listed | 17.7 | not listed | 60 | 14 | M 12 | 4 | 0.6 | ||
| 95 | 14 | not listed | 22 | not listed | 65 | 14 | M 12 | 4 | 0.7 | ||
| 105 | 16 | not listed | 27.6 | not listed | 75 | 14 | M 12 | 4 | 0.9 | ||
| 115 | 16 | not listed | 34.4 | not listed | 85 | 14 | M 12 | 4 | 1.1 | ||
| 140 | 16 | not listed | 43.1 | not listed | 100 | 18 | M 16 | 4 | 1.6 | ||
| 150 | 16 | not listed | 49 | not listed | 110 | 18 | M 16 | 4 | 1.9 | ||
| 165 | 18 | not listed | 61.1 | not listed | 125 | 18 | M 16 | 4 | 2.5 | ||
| 185 | 18 | not listed | 77.1 | not listed | 145 | 18 | M 16 | 4 | 3 | ||
| 200 | 20 | not listed | 90.3 | not listed | 160 | 18 | M 16 | 8 | 3.6 | ||
| 220 | 20 | not listed | 115.9 | not listed | 180 | 18 | M 16 | 8 | 4 | ||
| 250 | 22 | not listed | 141.6 | not listed | 210 | 18 | M 16 | 8 | 5.4 | ||
| 285 | 22 | not listed | 170.5 | not listed | 240 | 22 | M 20 | 8 | 6.6 | In the viewer | |
| 340 | 24 | not listed | 221.8 | not listed | 295 | 22 | M 20 | 12 | 9 | ||
| 405 | 26 | not listed | 276.2 | not listed | 355 | 26 | M 24 | 12 | 12.8 | ||
| 460 | 28 | not listed | 327.6 | not listed | 410 | 26 | M 24 | 12 | 16.6 | ||
| 520 | 30 | not listed | 359.7 | not listed | 470 | 26 | M 24 | 16 | 24.1 | ||
| 580 | 32 | not listed | 411 | not listed | 525 | 30 | M 27 | 16 | 30.2 | ||
| 715 | 38 | not listed | 513.6 | not listed | 650 | 33 | M 30 | 20 | 52.9 |
Dimensions in mm, for reference. Tolerances and full requirements as per the applicable standard. Confirm against your specification before ordering.
Source: Shiv Shakti Machine Tools Flange Catalogue, edition 2026 (draft), page 14. “–” means the catalogue lists no value.
[CONFIRM: table checked and signed off by the owners (unverified)]
Where it’s used
Water, drainage and ducting.
Industries: oil and gas, refining and petrochemical, power generation, water and wastewater, chemical and fertiliser, and general fabrication.
By material
- Carbon steel plate
- Plate flanges
- EN and DIN grades
- Flanges to EN 1092-1 and DIN
